Acrylic resin 601.2
The fluidity of this transparent mounting resin and its very low shrinkage ensure a maximum penetration ratio in cavities. It is ideal for microelectronics, optics and microsystem applications. Compatible for conventional scanning electron microscopy (SEM) examinations.
Mono-component resin easy to dose and manipulate (no loss). Polymerisation with low temperature rise in 20 minutes in the blue light device M.M.866 + 10 minutes for the surface varnish. With no disturbing odour, it is resistant to alcohol and acids.
| Characteristics |
Qty | Ref. | |
|
Transparent Acrylic |
Resin (1 liter) + varnish (100 ml) set | 06 00601 00 | |
| Resin (1 liter) | 06 01601 00 | ||
| Varnish (100 ml) | 06 01602 00 | ||
Epoxy resin 603
The Resin 603 is a two-component epoxy resin without CMR substance used to achieve high quality technical metallographic mountings at room temperature. This resin is the best choice when the transparency of the coating is a requirement.
The resin has zero shrinkage, excellent adhesion to all kinds of materials and a very good chemical resistance.
With an ideally adjusted viscosity, the resin 603 is used to mount metallographic specimens with complex shapes, porosities, or delicate technical coatings.
Solvent free and CMR-free (no Carcinogenic, Mutagenic, toxic to Reproduction susptences).
| Characteristics |
Qty | Ref. | |
|
Transparent Epoxy 2 liquid components |
Liquid (1 liter) + hardener (500 ml) set | 06 00603 00 | |
| Liquid (1 liter) | 06 01603 00 | ||
| Hardener (500 ml) | 06 02603 00 | ||
Epoxy resin 603.2
The Resin 603.2 is a fast-curing two-component epoxy resin without CMR substance used to make technical metallographic mountings. It must be used on materials that withstand temperatures of 140°C.
This transparent resin has zero shrinkage, excellent adhesion to all kinds of materials and very good chemical resistance.
Solvent free and CMR-free (no Carcinogenic, Mutagenic, toxic to Reproduction susptences).
Polymerisation 2h.
| Characteristics |
Qty | Ref. | |
|
Transparent Epoxy 2 liquid components |
Liquid (1 liter) + hardener (500 ml) set | 060060320 | |
| Liquid (1 liter) | 060160320 | ||
| Hardener (500 ml) | 060260320 | ||
Methyl-methacrylate resin 605
Versatile, it is adapted to the majority of common materials for the fast mounting standard sample. It is possible to change the viscosity by modifying the proportion of the mixture: liquid + powder. Resistant to the principal acids used in laboratories.
| Characteristics |
Qty | Ref. | |
|
Green Methyl-methacrylate |
Powder (1 kg) + catalyst (500 ml) set | 06 00605 00 | |
| Catalyst (500 ml) | 06 00615 00 | ||
| Powder (10 kg) + catalyst (5 liters) set | 06 00605 10 | ||
| Catalyst (5 litres: cond. 2 x 2,5 liters)* | 06 00615 10 | ||
* Packaging related to transport restrictions
Methyl-methacrylate resin 609
A perfectly transparent resin used for precision parts, notably those of the electrical or
electronics industry. It renders the sample perfectly visible, which allows analysing precise points. It must be used with the pneumatic device M.M.806 to obtain an optimum transparency.
| Characteristics |
Qty | Ref. | |
|
Methyl-methacrylate |
Powder (1 kg) + catalyst (500 ml) set | 06 00609 00 | |
| Catalyst (500 ml) | 06 00619 00 | ||
| Powder 1 kg | 06 00609 20 | ||
| Powder (10 kg) + catalyst (5 liters) set | 06 00609 10 | ||
| Catalyst (5 litres : cond. 2 x 2,5 liters)* | 06 00619 10 | ||
* Packaging related to transport restrictions
Methyl-methacrylate resin 609 Plastichrome
The methyl-methacrylate resin 609 is available in the Plastichrome version – 5 transparent colours to simplify the classification of samples.
| Characteristics |
Qty | Colors | Ref. |
|
Methyl-methacrylate |
Powder (1 kg) + Catalyst (500 ml) set |
BLUE | 06 0071B 00 |
| YELLOW | 06 0071J 00 |
||
| ORANGE | 06 0071O 00 |
||
| RED | 06 0071R 00 |
||
| GREEN | 06 0071V 00 |
Polyester resin 607
The Resin 607 is a three-component resin based on modified polyester.
This fast curing resin adheres perfectly to metal surfaces and its mechanical characteristics make it particularly effective on very hard materials.
Its very low shrinkage allows edge examinations on metallographic samples.
It is resistant to the main acids and bases used in laboratories.
| Characteristics |
Qty | Ref. | |
|
Modified green polyester |
Liquid resin (1 liter) + hardener (500 ml) set | 06 00607 00 | |
| Catalyst (500 ml) | 06 00607 10 | ||
| Hardener (250 ml) | 06 00607 20 | ||
| Powder (750 g) | 06 00607 30 | ||
Polyester resin 608
The Bi-component resin 608 based on low viscosity modified polyester is ideal for the mounting of metallographic samples of complex shapes.
With a very low shrinkage and a high hardness, this resin is suitable for the mounting of hard and very hard samples.
It is resistant to the main acids and bases used in laboratories.
| Characteristics |
Qty | Ref. | |
|
Modified green polyester |
Powder (1 kg) + catalyst (500 ml) set | 06 00608 00 | |
| Catalyst (500 ml) | 06 01608 00 | ||
| Powder (1 kg) | 06 02608 00 | ||
| Powder (15 kg) + catalyst (5 liters) set | 06 00608 10 | ||
| Catalyst (5 liters) | 06 01608 11 | ||
| Powder (10 kg) | 06 02608 12 | ||
Guidance
Procedure of the cold mounting
The sample is placed at the bottom of the mould; it is recommended to use clips to maintain the thin samples on its edge. Mix the resin components respecting the dosage indicated in the technical sheet. Gently blend to avoid air bubbles. Pour the resin in the mould until the desired level and let it harden on open air or in a pressure device M.M.806 in order to get rid of any bubbles or porosities.
The mounting time is about 15 minutes long.
ISOFORCE 
Assistance & information
All rights reserved © LAM PLAN SA 2020
Made by : 
+33 (0)4 50 43 96 30
